
28 mins read
Conductivity Calibration and Verification for Routine Laboratory Measurement
Conductivity Calibration and Verification for Routine Laboratory Measurement
Detection of
Max. measured value
Measured range
Min. measured value
Specifications
Compare models£15.73
Inc. VAT
£15.73Inc. VAT
QUANTOFIX Chlorine Dioxide Sensitive 1 test strips allow semi-quantitative measurement of chlorine dioxide in aqueous solutions. The manufacturer specifies a 0.05–1.2 mg/L measuring range, using a visual colour scale, with 25 strips per tube.
This test is intended for semi-quantitative testing of chlorine dioxide.
The listed measuring range is 0.05–1.2 mg/L. Use the manufacturer instructions for reading the result.
Check the manufacturer instructions for compatible sample matrices, any pretreatment and potential interferences before testing.
The listing specifies a pack of 25.
£15.73
Inc. VAT
Manufacturer P/N
91363
Part Number
6.522 432
Manufacturer
Macherey-Nagel
Detection of
Chlorine dioxide Sensitive 1
£24.71
Inc. VAT
Manufacturer P/N
91355
Part Number
6.315 126
Manufacturer
Macherey-Nagel
Detection of
Chlorine dioxide 15
£35.06
Inc. VAT
Manufacturer P/N
91357
Part Number
6.315 127
Manufacturer
Macherey-Nagel
Detection of
Chlorine dioxide 3000

28 mins read
Conductivity Calibration and Verification for Routine Laboratory Measurement

22 mins read
HPLC Solvent Handling Best Practices: Bottles, Caps, Tubing and Safety Considerations

21 mins read
Certified and Pre-Cleaned Bottles for Procurement Teams - What the Certificate Must Confirm

23 mins read
How UK Laboratories Reduce Pipette Tip Consumables Costs Without Increasing Workflow Risk

29 mins read
pH Calibration and Verification for Routine Laboratory Measurement