
27 mins read
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure
Capacity
Max. temperature
Min. temperature
Temperature
Type
Specifications
Compare models£997.92
Inc. VAT
Peter Huber Thermofluid M90.055.03 SilOil (Order No. 6258) is a premium, low-viscosity silicone oil engineered for extreme low-temperature applications in laboratory and industrial thermoregulation. This high-quality heat transfer medium is specifically designed to provide optimal thermodynamic performance while maintaining high environmental safety standards. Characterized by its exceptional fluidity at sub-zero temperatures, M90.055.03 ensures rapid heat transfer and precise temperature control. It is ideally suited for use in Huber Unistats and other closed-loop systems where high-speed temperature changes and extreme cooling depths are required.
Huber M90.055.03 SilOil is the professional choice for pharmaceutical research, aerospace testing, and chemical engineering processes requiring cryogenic temperatures. By minimizing the internal resistance of the circulation pump through its low viscosity, it allows temperature control units to reach their maximum cooling speed and efficiency.
Manufacturer P/N
6258
Part Number
7.615 661
Manufacturer
Peter Huber
Capacity
5 l
Manufacturer P/N
6157
Part Number
6.201 670
Manufacturer
Peter Huber
Capacity
5 l
Manufacturer P/N
6162
Part Number
6.250 420
Manufacturer
Peter Huber
Capacity
10 l
Manufacturer P/N
6161
Part Number
6.306 078
Manufacturer
Peter Huber
Capacity
5 l
Manufacturer P/N
6259
Part Number
6.202 172
Manufacturer
Peter Huber
Capacity
10 l
Manufacturer P/N
6163
Part Number
6.250 278
Manufacturer
Peter Huber
Capacity
5 l
Manufacturer P/N
6158
Part Number
6.203 535
Manufacturer
Peter Huber
Capacity
10 l
Manufacturer P/N
6166
Part Number
6.225 263
Manufacturer
Peter Huber
Capacity
10 l
Manufacturer P/N
6164
Part Number
6.304 378
Manufacturer
Peter Huber
Capacity
10 l
Manufacturer P/N
6165
Part Number
6.201 255
Manufacturer
Peter Huber
Capacity
5 l
Peter Huber Thermofluid M90.055.03 SilOil (Order No. 6258) is a premium, low-viscosity silicone oil engineered for extreme low-temperature applications in laboratory and industrial thermoregulation. This high-quality heat transfer medium is specifically designed to provide optimal thermodynamic performance while maintaining high environmental safety standards. Characterized by its exceptional fluidity at sub-zero temperatures, M90.055.03 ensures rapid heat transfer and precise temperature control. It is ideally suited for use in Huber Unistats and other closed-loop systems where high-speed temperature changes and extreme cooling depths are required.
Yes. It is designed for the laboratory application described by the manufacturer, and offers operates from -90°C up to +55°C in open/closed systems, and can be extended up to +170°C in externally sealed systems (such as Huber Unistats). and a very low viscosity of approximately 2 mm²/s at 25°C, ensuring high flow rates and efficient heat exchange even at the lowest temperatures. to support this kind of work.
It has the following key features: operates from -90°C up to +55°C in open/closed systems, and can be extended up to +170°C in externally sealed systems (such as Huber Unistats)., a very low viscosity of approximately 2 mm²/s at 25°C, ensuring high flow rates and efficient heat exchange even at the lowest temperatures. and chemically inert, colorless, and odorless polydimethylsiloxane base provides excellent long-term thermal stability.
It offers non-toxic and not classified as a hazardous substance or dangerous good, simplifying handling and storage., optimized for use in closed-loop systems to prevent oxidation and moisture absorption, significantly extending the fluid's service life. and safe for use with most metals and plastics, though care should be taken with silicone-based seals or gaskets.

27 mins read
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure

19 mins read
SPE Consumables Procurement Checklist for UK Analytical Laboratories

24 mins read
Bottle Labelling and Traceability for Lab Managers - Reducing Confusion, Waste and Reorder Errors

21 mins read
How to Standardise Pipette Tip Procurement Across Laboratory Teams

33 mins read
Dissolved Oxygen Calibration and Verification for Laboratory Measurement