
27 mins read
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure
Ø
UNSPSC
Specifications
Compare models£121.37
Inc. VAT
The Cytiva Whatman GF 8 glass fibre filter is a borosilicate glass microfibre filter with binder, supplied here as 47 mm round filters in a pack of 200. An inorganic binder gives high mechanical stability and, according to Cytiva, temperature resistance up to 500 °C. GF 8 offers fast filtration and a high air flow rate with a nominal particle retention of 3 µm, and is used as an air pollution filter for detecting furans, PCB and other chemicals in vapour samples. It can also be used as a prefilter for dense samples.
| Manufacturer Part Number | 10370119 |
|---|---|
| Grade | GF 8 |
| Material | Borosilicate glass microfibre with inorganic binder |
| Format | Round |
| Diameter | 47 mm |
| Basis Weight | 75 g/m² |
| Separation Efficiency | 99 % |
| Nominal Particle Retention | 3 µm (manufacturer) |
| Air Flow Rate | 12 s/100 mL/1.56 cm² (manufacturer) |
| Maximum Temperature | 500 °C (manufacturer) |
| Pack Size | 200 |
GF 8 filters faster and gives a higher air flow rate than the similar Grade GF 9, according to Cytiva. The 47 mm coarse particle filter suits 47 mm filter holders and air samplers; other diameters and 60 x 90 mm sheets are available in the same grade.
£121.37
Inc. VAT
Manufacturer P/N
10370119
Part Number
7.009 869
Manufacturer
Cytiva
Ø
47 mm
£179.52
Inc. VAT
Manufacturer P/N
10370111
Part Number
7.009 868
Manufacturer
Cytiva
Ø
200 mm
£198.53
Inc. VAT
Manufacturer P/N
10370105
Part Number
9.068 602
Manufacturer
Cytiva
Ø
90 mm
Whatman GF 8 is used as an air pollution filter for PCB, DDE, DDT, furans and dioxins, for pollution measurements in industrial and urban areas, workplace dust measurements, dust fraction in technical gases and dust-collecting effectiveness testing. It can also be used as a prefilter for dense samples.
The inorganic binder strengthens the borosilicate glass microfibres for high mechanical stability, which helps the filter support heavy samples. Cytiva states that this binder also gives temperature resistance up to 500 °C, which is higher than typical organic binder glass fibre filters.
Cytiva lists GF 8 with a nominal particle retention of 3 µm and an air flow rate of 12 s/100 mL/1.56 cm². The product name also states 99 % separation efficiency and 75 g/m² basis weight. GF 8 filters faster than the similar Grade GF 9.
Part number 10370119 contains 200 round GF 8 filters, 47 mm in diameter. This size suits 47 mm filter holders and air samplers. For larger samplers, GF 8 is also available as 90 mm and 200 mm circles and as 60 x 90 mm sheets.
MN 85/70 uses an organic binder, with 0.6 µm retention and stability up to 200 °C, per Macherey-Nagel. GF 8 uses an inorganic binder with nominal 3 µm retention and resistance up to 500 °C. Choose GF 8 for hot air monitoring; MN 85/70 may suit finer liquid filtration below 200 °C.

27 mins read
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure

19 mins read
SPE Consumables Procurement Checklist for UK Analytical Laboratories

24 mins read
Bottle Labelling and Traceability for Lab Managers - Reducing Confusion, Waste and Reorder Errors

21 mins read
How to Standardise Pipette Tip Procurement Across Laboratory Teams

33 mins read
Dissolved Oxygen Calibration and Verification for Laboratory Measurement