
27 mins read
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure
Glove size
Specifications
Compare models£234.96
Inc. VAT
The Cryo.Expert Cryo Gloves, 9 To 9.5, M, Approximately 400 mm Length are designed to protect hands and arms when working in very low temperatures down to approximately -196 °C. They are suitable for applications involving ultra-low freezers, dry ice at -79 °C and work in the gas phase of liquid nitrogen without direct contact with liquid nitrogen.
Note: Not suitable for immersion in cryogenic liquids.
These Cryo.Expert cryo gloves are suitable for users requiring reliable hand and arm protection for cryogenic handling and ultra-low temperature applications.
Manufacturer P/N
MAM
Part Number
9.005 446
Manufacturer
Cryo.Expert
Glove size
M
Manufacturer P/N
515 MAL
Part Number
9.005 447
Manufacturer
Cryo.Expert
Glove size
L
Manufacturer P/N
515 MAXL
Part Number
9.405 121
Manufacturer
Cryo.Expert
Glove size
XL
Manufacturer P/N
514 MAS
Part Number
9.405 120
Manufacturer
Cryo.Expert
Glove size
S
It are designed to protect hands and arms when working in very low temperatures down to approximately -196 °C. They are suitable for applications involving ultra-low freezers, dry ice at -79 °C and work in the gas phase of liquid nitrogen without direct contact with liquid nitrogen.
Yes. It is designed for For ultra-low freezers, dry ice at -79 °C and gas phase liquid nitrogen work, and offers a size of 9 to 9.5, M and a length range of 335 to 395 mm depending on size to support this kind of work.
It has a size of 9 to 9.5, M and a length range of 335 to 395 mm depending on size.
It offers approximately 400 mm, S, M, L, XL and XXL, suitable for very low temperatures down to approximately -196 °C and according to EN 511, EN 420, EN 388, Cat.III.

27 mins read
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure

19 mins read
SPE Consumables Procurement Checklist for UK Analytical Laboratories

24 mins read
Bottle Labelling and Traceability for Lab Managers - Reducing Confusion, Waste and Reorder Errors

21 mins read
How to Standardise Pipette Tip Procurement Across Laboratory Teams

33 mins read
Dissolved Oxygen Calibration and Verification for Laboratory Measurement