
27 mins read
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure
Specifications
£199.58
Inc. VAT
The Buddeberg Bath Liquids, 5L (Part No. 2.035.998) are designed for use in laboratory heating and cooling applications. Composed of modified polyglycol ether, this clear, colourless to lightly yellowish liquid offers a high flash point and thermal stability, making it suitable for continuous use as a heating medium up to approximately 170°C. For short periods, higher temperatures below the flash point are possible but may result in rapid darkening.
This bath liquid is ideal for laboratory applications requiring stable and safe heating and cooling mediums.
It are designed for use in laboratory heating and cooling applications. Composed of modified polyglycol ether, this clear, colourless to lightly yellowish liquid offers a high flash point and thermal stability, making it suitable for continuous use as a heating medium up to approximately 170°C. For short periods, higher temperatures below the flash point are possible but may result in rapid darkening.
Yes. It is designed for use in laboratory heating and cooling applications, and offers a flashpoint of > 290°C (DIN EN ISO 2592) and a density of 1.13 to 1.17 g/cm³ (DIN 51757, ASTM 1298, 23°C) to support this kind of work.
It has a flashpoint of > 290°C (DIN EN ISO 2592) and a density of 1.13 to 1.17 g/cm³ (DIN 51757, ASTM 1298, 23°C).
It offers modified polyglycol ether, clear, colourless to lightly yellowish liquid, miscible with water in any ratio; hardness of water has no effect and unlimited storage time in original, unopened containers; may darken over time without affecting performance.

27 mins read
Troubleshooting pH Measurements: Drift, Slow Response and Calibration Failure

19 mins read
SPE Consumables Procurement Checklist for UK Analytical Laboratories

24 mins read
Bottle Labelling and Traceability for Lab Managers - Reducing Confusion, Waste and Reorder Errors

21 mins read
How to Standardise Pipette Tip Procurement Across Laboratory Teams

33 mins read
Dissolved Oxygen Calibration and Verification for Laboratory Measurement