
25 mins read
Laboratory Bottle Labelling and Traceability - What UK Labs Should Record
Laboratory Bottle Labelling and Traceability - What UK Labs Should Record
For ext. tubing Ø
Thread
Specifications
Compare models£81.40
Inc. VAT
£81.40Inc. VAT
The Bohlender Swivelling Screw Fitting GL 18 a Ø 6mm, PPS/PTFE is an insertion of probes, tubes or tubing into vessels with GL necks for avoiding collision with the stirrer shaft. The fitting is screwed on the GL neck and the inserted element can be fixed in the requested position. Screw cap made of PPS with inner parts made of PTFE.
The Bohlender Swivelling Screw Fitting GL 18 a Ø 6mm, PPS/PTFE is a reliable fitting choice for laboratory environments that require documented specification and consistent performance.
Manufacturer P/N
D 690-24
Part Number
6.287 966
Manufacturer
Bohlender
For ext. tubing Ø
6.0 mm
£164.38
Inc. VAT
Manufacturer P/N
D 690-28
Part Number
4.723 235
Manufacturer
Bohlender
For ext. tubing Ø
8.0 mm
Manufacturer P/N
D 690-50
Part Number
6.276 238
Manufacturer
Bohlender
For ext. tubing Ø
12.0 mm
Manufacturer P/N
D 690-46
Part Number
4.681 107
Manufacturer
Bohlender
For ext. tubing Ø
10.0 mm
Manufacturer P/N
D 690-34
Part Number
7.627 710
Manufacturer
Bohlender
For ext. tubing Ø
6.0 mm
Manufacturer P/N
D 690-18
Part Number
6.261 610
Manufacturer
Bohlender
For ext. tubing Ø
3.2 mm
Manufacturer P/N
D 690-38
Part Number
6.234 972
Manufacturer
Bohlender
For ext. tubing Ø
8.0 mm
It is an insertion of probes, tubes or tubing into vessels with GL necks for avoiding collision with the stirrer shaft. The fitting is screwed on the GL neck and the inserted element can be fixed in the requested position. Screw cap made of PPS with inner parts made of PTFE.
Yes. It is designed for laboratory and technical fluid-handling set-ups, and offers the fitting is screwed on the GL neck and the inserted element can be fixed in the requested position. to support this kind of work.
It has the following key features: the fitting is screwed on the GL neck and the inserted element can be fixed in the requested position.
It is made from screw cap made of PPS with inner parts made of PTFE. It is compatible with confirm compatibility with your existing fitting set-up, including dimensions, material and interface, before use.

25 mins read
Laboratory Bottle Labelling and Traceability - What UK Labs Should Record

25 mins read
Bulk Purchasing Pipette Tips Without Overstocking Laboratory Inventory

28 mins read
Conductivity Calibration and Verification for Routine Laboratory Measurement

22 mins read
HPLC Solvent Handling Best Practices: Bottles, Caps, Tubing and Safety Considerations

21 mins read
Certified and Pre-Cleaned Bottles for Procurement Teams - What the Certificate Must Confirm