DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter

The DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter is designed for safe transfer of liquid media within a closed and sterile system, helping reduce evaporation during laboratory fluid handling. This flexible modular insert allows different hose diameters to be connected, supports sterile pressure equalisation through use of a membrane filter, and unused ports can be fitted with a blind cap.

Key Features:

• Brand: DWK
• Product Type: Insert for screw cap
• Thread Size: GL 18
• Inner Diameter: 6.0 mm
• System: Flexible modular system for closed and sterile liquid transfer
• Pressure Equalisation: Sterile pressure equalisation possible with membrane filter
• Port Closure: Unused ports can be fitted with a blind cap
• Autoclavable: Yes
• Maximum Temperature: 140 °C

This DWK GL 18 screw cap insert is suitable for laboratories requiring secure modular liquid transfer within closed sterile systems.

Frequently Asked Questions:

What is the DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter used for?
The DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter is a laboratory filter used for safe transfer of liquid media within a closed and sterile system, helping reduce evaporation during laboratory fluid handling. Its documented configuration includes maximum temperature: 140 °C, and inner diameter: 6.0 mm. It is identified by manufacturer part number 1160170, LabFriend SKU 9.284 534. It should not be selected for applications outside the manufacturer's stated limits or where an unlisted compatibility is required.

Is the DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter suitable for safe transfer of liquid media within a closed and sterile system, helping reduce evaporation during laboratory fluid handling?
Yes. The DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter is suitable for safe transfer of liquid media within a closed and sterile system, helping reduce evaporation during laboratory fluid handling. Its suitability is determined by maximum temperature: 140 °C, inner diameter: 6.0 mm, and thread size: GL 18. It should not be selected for applications outside the manufacturer's stated limits or where an unlisted compatibility is required. Before selection, confirm that the sample, process, vessel or instrument conditions match the published DWK specification.

What are the most important specifications of the DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter?
The most important specifications of the DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter include maximum temperature: 140 °C, inner diameter: 6.0 mm, thread size: GL 18, and pressure equalisation: Sterile pressure equalisation possible with membrane filter. The listed item is manufacturer part number 1160170, LabFriend SKU 9.284 534. It should not be selected for applications outside the manufacturer's stated limits or where an unlisted compatibility is required. Specifications not stated in the product description should be confirmed before purchase rather than assumed from a related model.

What is the DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter compatible with, and what is required for use?
The DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter has documented compatibility or supply details including thread size: GL 18; port closure: Unused ports can be fitted with a blind cap. Confirm filter diameter, pore size, membrane material, holder connection and chemical compatibility with the sample and solvent. Do not assume that an accessory, fitting, consumable or instrument is compatible unless its dimensions, interface and material requirements match the DWK specification.

What is the difference between the DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter and the DWK Screw Cap GL 18, Red, 4 Port?
The DWK Insert For Screw Cap GL 18, 6.0 mm Inner Diameter differs from the DWK Screw Cap GL 18, Red, 4 Port in the documented product type (Insert for screw cap versus Screw cap). Both are DWK products in the same general filter family, but their capacities, ranges or configurations should not be treated as interchangeable. Select the model whose published limits match the application and confirm accessory or connection differences before ordering.