Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE

The Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE is a high-quality sealing component designed for laboratory stirring applications. Manufactured by Bohlender, this stirrer closure features a PTFE ground joint core with raised sealing rings, ensuring a secure fit and reducing the risk of breakage. The special PTFE gasket, combined with an FPM O-ring compressed by a GL screw cap, provides excellent sealing against the stirrer shaft. This gasket is replaceable after wear, enhancing the product's longevity.

Key Features:

• Brand: Bohlender
• Material: PTFE with FPM O-ring
• Thread Size: GL 25
• Cone Size: NS 24/29
• Stirrer Shaft Diameter: Ø 8 mm
• Overall Length: 69 mm
• Temperature Resistance: Suitable for vacuum applications
• Applications: Ideal for use with stainless steel, glass, and BOLA stirrer shafts

This stirrer closure is essential for laboratories requiring reliable sealing solutions in various research and analytical settings.

Frequently Asked Questions:

What is the Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE used for?
The Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE is a laboratory product intended for use with stainless steel, glass, and BOLA stirrer shafts. Its documented configuration includes temperature resistance: Suitable for vacuum applications, and stirrer shaft diameter: Ø 8 mm. It is identified by manufacturer part number C 424-08, LabFriend SKU 6.251 738. It should not be selected for applications outside the manufacturer's stated limits or where an unlisted compatibility is required.

Is the Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE suitable for use with stainless steel, glass, and BOLA stirrer shafts?
Yes. The Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE is suitable for use with stainless steel, glass, and BOLA stirrer shafts. Its suitability is determined by temperature resistance: Suitable for vacuum applications, stirrer shaft diameter: Ø 8 mm, and overall length: 69 mm. It should not be selected for applications outside the manufacturer's stated limits or where an unlisted compatibility is required. Before selection, confirm that the sample, process, vessel or instrument conditions match the published Bohlender specification.

What are the most important specifications of the Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE?
The most important specifications of the Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE include temperature resistance: Suitable for vacuum applications, stirrer shaft diameter: Ø 8 mm, overall length: 69 mm, and material: PTFE with FPM O-ring. The listed item is manufacturer part number C 424-08, LabFriend SKU 6.251 738. It should not be selected for applications outside the manufacturer's stated limits or where an unlisted compatibility is required. Specifications not stated in the product description should be confirmed before purchase rather than assumed from a related model.

What is the Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE compatible with, and what is required for use?
The Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE has documented compatibility or supply details including thread size: GL 25. Confirm the stated dimensions, material, operating range, interface and any accessories or consumables not explicitly included. Do not assume that an accessory, fitting, consumable or instrument is compatible unless its dimensions, interface and material requirements match the Bohlender specification.

What is the difference between the Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE and the Bohlender Stirr Closure NS 24/29 Ø 10 mm, GL 25, PTFE?
The Bohlender Stirr Closure NS 24/29 Ø 8 mm, GL 25, PTFE differs from the Bohlender Stirr Closure NS 24/29 Ø 10 mm, GL 25, PTFE in the documented material (PTFE with FPM O-ring versus PTFE core with FPM O-ring), overall length (69 mm versus 70 mm). Both are Bohlender products in the same general product family, but their capacities, ranges or configurations should not be treated as interchangeable. Select the model whose published limits match the application and confirm accessory or connection differences before ordering.